Mcintosh C49 2-Channel Preamplifiers
Mcintosh C49 2-Channel Preamplifiers
ELECTRONIC SPECIFICATIONS
- Number of Channels
- 2
- Total Harmonic Distortion
- 0.005%
- Frequency Response
- +0, -0.5dB from 20Hz to 20kHz
+0, -3dB from 15Hz to 100kHz
- Maximum Volts Out (Balanced / Unbalanced)
- 16V RMS / 8V RMS
- Sensitivity High Level (Balanced / Unbalanced)
- 900mV / 450mV
- Sensitivity Phono (Moving Coil)
- 0.45mV
- Sensitivity Phono (Moving Magnet)
- 4.5mV
- Signal To Noise Ratio (High Level)
- 100dB
- Signal To Noise Ratio (Moving Coil)
- 80dB
- Signal To Noise Ratio (Moving Magnet)
- 82dB
- Voltage Gain (High Level)
- 15dB
- Voltage Gain (Moving Coil)
- 60dB
- Voltage Gain (Moving Magnet)
- 40dB
- Input Impedance (Balanced / Unbalanced)
- 44K ohm, 22K ohm
CONNECTIVITY
- Balanced Input
- 2
- Unbalanced Input
- 3
- Phono Input Moving Coil
- 1 (adjustable)
- Phono Input Moving Magnet
- 1 (adjustable)
- Upgradeable Digital Audio Module
- Yes: DA1
- Digital Coaxial Input
- 2
- Digital Optical Input
- 2
- Digital MCT (DIN) Input
- 1
- Digital USB Input
- 1
- HDMI (ARC) Input
- 0
- Digital AES/EBU Input
- 0
- Balanced Fixed Output
- 0
- Balanced Variable Output
- 2
- Unbalanced Fixed Output
- 1
- Unbalanced Variable Output
- 2
- Headphone Output
- 1/4" High Drive with Headphone Crossfeed Director (HXD®)
- Input Level Match
- Yes, +/- 6dB
- Home Theater PassThru
- Yes
- Unbalanced Analog Connector Type
- Standard
- Service Port
- 1
CONTROL
- Tone Controls
- Bass and Treble
- Tone Bypass and Input Assign
- Yes
- RS232 Control Input
- Yes
- Power Control Output
- 1 Main, 2 Trigger
- Rear Panel Data Port
- 4
- Rear Panel IR Sensor Input
- Yes
GENERAL SPECIFICATIONS
- Multi-Chassis or Single
- Single, two layer
- Output Meters
- No
- Vacuum Tube or Solid State
- Solid State
- Power Consumption (On)
- 30 Watts
WEIGHTS & DIMENSIONS
- Dimensions (W x H x D)
- 17.5" (44.45cm) x 6" (15.2cm) x 18" (45.72cm)
- Weight
- 23 lbs (10.4 kg)
- Shipping Weight
- 37.5 lbs (17 kg)