System Format
Active sub-woofer system – Auxiliary (ABR) loading. 18mm MDF cabinet
Low Frequency Limit
30Hz (- 6dB)
Upper Frequency Limit
Variable 40 – 120 Hz @ 24dB/Octave
Amplifier Power Output
220 Watts @ 1% THD+N
Amplifier Classification
Class D amplifier with Switch mode power supply (SMPSU)
Bass EQ Switch
Music / Movie / Impact
Phase Control
0 & 180 degrees
Auto Sensing
Line Level >3.5mV
Input Level Requirements
Standby after approximately 15 minutes if no signal sensed
Driver Compliment
1 x 10” (250mm) C-CAM® long throw driver
1 x 10” (250mm) Auxiliary bass radiator
Input Impedance
> 20K Ohms
Mains Input Voltage
AC 110 - 120 V ~ 50/60Hz; AC 220 - 240 V ~ 50/60Hz (Factory Region Preset)
Dimensions including amp & feet (HxWxD)
348 x 330 x 345mm
(1311/16 x 13 x 129/16 Inches)
Connections
Stereo RCA in, LFE in, 12v Trigger in (3.5mm mono mini-jack)
12v Trigger Input
5 - 12v via 3.5mm mono mini-jack socket
Power Consumption
220 Watts / 0.5 Watts in Standby (ErP approved)
Weight (Unpacked)
13.76Kg (30lb 4oz)